Subaru BRZ Gen 2 / Toyota GR86
The Subaru BRZ Gen 2 / Toyota GR86 tuning suite supports the following worldwide vehicles:
- 2022–on Subaru BRZ Gen 2
- 2022–on Toyota GR-86
- Supported by PhoneFlash
- All models can have their Engine ECU programmed via PhoneFlash.
RaceROM Custom Features
- Four-way Mode Switching
- Swap between four different modes using either the cruise control buttons or ECU Connect on your mobile device. Which mode you are in will be indicated on the rev counter. For example, you could get your tuner to set up a tune on mode 1 designed for track days – Track Mode; For enjoying yourself on the road in mode 2 – Fast Road Mode; a self-adjusting FlexFule tune on mode 3 – Flex Mode; and a tune for driving your grandma around on mode 4 – Economy Mode. It’s up to you to decide what set-up you want in each mode.
- Adjustable Launch Control
- Live adjustment of the launch RPM using the cruise-control switchgear or the ECU Connect app. It can be enabled in any map switch mode.
- Speed Density Option
- Run a speed density tune if you are running forced induction conversion or want to get rid of your MAF sensors to run bigger intakes.
- Adjustable Traction Control
- Once the tuner has set this up in your tune, aggressiveness can be adjusted in each of the 4 modes using the ECU Connect app on your phone.
- Flat-foot Shift
- Make full-throttle gearshifts by reducing engine torque and controlling the engine speed during the gear change. Requires a clutch switch
- Auto Blip
- Applies a short burst of throttle when downshifting under braking to provide a smooth entry into the next gear. Requires a clutch switch.
- Self Adjusting FlexFuel
- No more worries about calculating the ethanol in the tank; our RaceROM self-adjusting flex-fuel does it all for you. Just fit a 0-5v Flex Fuel sensor, and off you go. Whatever Ethanol content in the tank, the tune will automatically adjust to give you optimal performance. Link up with ECU Connect to display the current Ethanol blend on a gauge in a dashboard.
- Up to 8 CAN Outputs
- These outputs can be used with a suitable device to expand the ECU’s capabilities or integrate with a separate controller for systems such as boost control or pump and relay control.
- Valet Mode
- This needs to be set up by your tuner and can be enabled in one of your map switch modes. This comprises a low power mode with reduced torque and vehicle speed giving you peace of mind when the car is in someone else’s hands. Set in a map switch mode using steering wheel controls or via the ECU Connect app.
- Mode Switching
- Switch between four different modes as detailed above on the fly using your phone.
- Launch Control
- Adjust the launch control RPM using a slider on your phone. This is very handy for cars without cruise control fitted.
- Custom Features set up by your tuner
- You have up to five features that can be controlled using your mobile device. Configurable as a slider, numerical value or on/off switch, these inputs can be set up to interact with the ECU directly from the driver’s mobile device. Speak to your tuner to discuss what you would like.
- Typical features you could set up are:
- Make your Traction Control more or less aggressive
- Activate your Nitrous
- Set up a Push To Pass button
- Set up a pit lane speed limiter
- Adjust your pedal map
From £540 + VAT
Print 